The hybrid table saw is a versatile tool that provides more than one use. If you’re looking for the best of both worlds, this type of power tool may be just right for your needs!

But with so many options on the market today, getting your hands on just what you need can be tough work. That’s why we broke down some key considerations before making a decision to help make it easier for you to find the perfect model and avoid any wasted time or money in trial and error.

Top 10 Hybrid Table Saws Comparison Table

ImageNameHorsepowerSpeedRating (1-5)
1. Grizzly Industrial G0771Z Hybrid Table Saw2 HP3450 RPM4.3
2. Shop Fox W1837 10" Open-Stand Hybrid Table Saw2 HP3450 RPM4.3
3. BOSCH 4100XC-10 Worksite Table Saw4 HP3650 RPM4.8
4. Grizzly Industrial G1023RLWX Cabinet Table Saw5 HP4200 RPM4.6
5. LAGUNA TOOLS Fusion Table Saw1 3/4 HP4500 RPM3.4
6. DEWALT 10-Inch Table Saw2 HP4800 RPM4.9
7. Jet 708675PK 10" Deluxe XACTA Saw3 HP4300 RPM4.4
8. Delta 3 HP Motor 10 in. UNISAW with 52 in. BIESEMEYER Fence System3 HP4300 RPM3.9
9. Rockwell RK7241S Table Saw with Laser2 1/2 HP4800 RPM4.0
10. Grizzly G0690 Cabinet Table Saw with Riving Knife3 HP4300 RPM4.0

Things to Consider When Looking for the Best Hybrid Table Saw

Blade Guard

The blade guard is a technology invented to improve the safety of using hybrid table saws. It shields your fingers and hand from the blade and shields you from suffering any kind of injury. The saw uses a smart blade guard technology to enhance your safety while using it to minimize any kind of contact with the blade.

It is an ideal safety measure when using the table saw around other people. There are also some other tips you need to be keen on to enhance safety.

Fence Technology

Most hybrid table saws feature the T-square type of fence technology. What this technology does is that it enables the fence to offer a better hold on the pieces that you are working on. Even better, in case the fence is extendable or longer, you can achieve longer cuts and an even better hold.

What a good fence will do is that it will limit movements and shakes. In the end, you will get the most precise cuts for the next project. You should put more focus on the cast iron trunnions too.


Power is a critical factor to consider when buying the best hybrid table saw. The power of a table saw is determined by the motor capacity. The table saws that use high torque motors or double motors are some of the most powerful designs that you can get today.

What powerful motors do is that they increase the revolutions per minute that are equivalent to high speeds. It also equals a lesser time.


This is another factor that you need to consider when choosing the best hybrid table saw. Everyone would like to buy a hybrid table saw that is durable. It will be a worthy investment as it will last for a long time.

To get the most durable saw for your use, ensure that you’ve checked out that it is made of a metallic alloy construction. Some of the best materials that make a hybrid table durable are aluminum and steel construction.


The price is something you have to consider when choosing the best hybrid saw. To be honest, unless you can get a hybrid saw within your budget, you may not be in a position to get one if you are straining.

The amount of money the hybrid table saw goes for is a major factor that will influence the possibility of you making a purchase. Before you go ahead and decide on buying one, allocate a budget. Your budget should determine how much you are willing to spend comfortably.

Dust Collection

A dust collection is another critical factor to consider when looking for the best hybrid table saw. You should go for one with a four-inch dust port to enhance its effectiveness. Most of these require a firm connection to a vacuum system.

Make sure you have it in the right place before beginning the cutting process.

Top 3 Best Hybrid Table Saw Reviews

1. Grizzly Industrial G0771Z Hybrid Table Saw

The Grizzly Industrial G0771Z Hybrid Table Saw can be cut at a 90-degree angle. It’s built to be durable with cast iron construction and has wings for the extension as well. The saws blade guard makes safety precautions a breeze when orienting wood against the cutting blade.

A conveniently placed 4-inch dust port rounds out this hybrid table saw. You can attach the dust port to a dust collector to keep your workshop remains clean after completing a project. This hybrid table saw is easy to assemble and it starts quickly.

It has a straight, square fence that comes with a riving knife for safety. The saw also performs well in all stages of your woodworking project.

  • It is easy to assemble
  • It comes with a dust port
  • It features a guard that enhances the safety of use
  • Sometimes it may be difficult to raise and lower the blade

2. Shop Fox W1837 10″ Open-Stand Hybrid Table Saw

The Shop Fox W1837 10″ Open-Stand Hybrid Table Saw is ideal for woodworkers and contractors who regard themselves as beginners. It comes with an enclosed cabinet bottom that measures about a four-inch dust port.

It comes with the best beginner-friendly features and its feet can be leveled up with ease. It features a precision-ground cast iron table with steel wings that measure 40.25 by 27 inches. Its rip capacity is thirty inches to the right and fifteen inches to the left.

It also comes with a lift-off fence with a rear and front locking ability. Another awesome thing about it is that its blade can tilt for forty-five degrees in an attempt to make custom cuts.

  • It is easy to assemble
  • It is portable
  • It allows for an easy blade tilt
  • The saw’s weight is heavy

3. BOSCH 4100XC-10 Worksite Table Saw

The BOSCH 4100XC-10 Worksite Table Saw has 15 amps with a maximum of 4 HP and 3,650 RPM. It is ideal for both cross-cutting and rip-cutting of all rough and fine materials. It weighs around 94 pounds and measures 27 by 32.5 by 13 inches.

It features a soft start circuitry that manages the start-up of the motor and minimizes the possibility of circuit breaker tripping. Its constant response circuitry assists in the maintenance of the speed under the load.

It features restart protection that assists in avoiding accidental startup. This hybrid table saw functions in a great way and comes with a Gravity-Rise Wheeled Stand that allows it to move with ease. 

It features a guard that enhances the safety of use. The pawls and riving knife provides total protection, and the guard acts like a barrier preventing contact from the blade and at the same time enabling one to see whatever they are cutting clearly. 

  • It is portable
  • It is easy to assemble
  • It offers high accuracy
  • It didn’t have as much power as expected

Frequently Asked Questions

What is a Hybrid Table Saw?

A hybrid table saw combines the features of a contractor saw and a cabinet saw. It has a heavy-duty blade carriage that connects to the cabinet with substantial trunnions, which are attached to the base for stability.

The cabinet contains a powerful motor and runs smoothly on a short drive belt. A hybrid table saw also possesses a compact frame and convenient transport options that are typical in contractor saws.

The combination of all these features makes hybrid table saws very attractive to woodworkers, DIYers, professionals, and even cabinet shops. They allow you to make furniture components or even entire cabinets in your garage, shop, or even workspace.

What is the Best Hybrid Table Saw For the Money?

The Shop Fox W1837 10″ Open-Stand Hybrid Table Saw. It is affordable and good for contractors and woodworkers who feel like beginners. It has all the necessities to begin your woodworking process.

How Do I Adjust My Table Saw Blade?

Set the blade angle degree at ‘’0’’ and put the blade cranked at full height. On the table, place one leg of the square and the other one at 1/16 inch away from the blade.

Check between the body of the blade and the square. You should see a straight line of daylight, if you see a wedge, adjust the screw in the perpendicular line.

When the blade is perpendicular, change the blade angle scale to ‘0’ degrees. You can achieve this by bending the pointer in some saws or loosening a small screw and slightly move the pointer.

How Do I Adjust My Table Saw Blade Guard?

Use your square and place it beside the splitter and the blade. Carefully bend the splitter along the line with the blade using a clamp. If you need some major adjustments, add or subtract a washer in places the guard has fastened to the saw.

How to Avoid Kickback on the Table Saw?

When operating a machine as the hybrid table saw, you experience kickbacks that can be dangerous. Kickback happens when the board between the fence and blade gets pinched, spins towards you, gets hold of it, and tosses back to you.

When dealing with a hard workpiece or skinny strips, anti-kickback pawls do not prevent it at all times. The sure defense mechanism is to stay out of the way of possible kickback. Featherboards may hinder kickback or using push sticks to stretch your reach.

Using outfeed rollers help to support longboards, holding back your impulse to get to the blade and collect falling longboard after cutting.

What is the Purpose of a Table Saw Sled?

Its setting helps the workpiece to sit against the wooden fence hence preventing the workpiece from slipping. Also, the sled ensures a perfect square cut at all times.

Can I Cut 45-Degree Miters With My Table Saw?

Yes, you can. It is easy for those molding up to three feet. You can comfortably cut picture frames or other sizeable projects. For longer pieces, you will need more room to move around hence difficult to use a table saw. A miter saw is more accurate to use.

Set the miter gauge at 45 degrees and clamp the board against it while you direct it past the blade. Miter jig makes lots of cuts as it is set at 45 degrees and makes accurate cuts.

How to protect your fingers?

  • Blade guard use – it has three safety features to protect your fingers. The plastic shroud keeps away the fingers from the blade and stops splinters from getting back to you. The splitter keeps the cut open after leaving the blade to block pinching. The third one is anti-kickback pawls to hinder kickback.
  • Always use a push stick when your fingers go within 4 inches towards the blade.
  • Ensure the blade protrudes about ¼ inch above the workpiece.
  • Use common sense to protect yourself.

How Do I Use My Table Saw to Cut Plywood?

The process of cutting plywood is laborious than one would think. For you to achieve a high-quality result, you need to master the proper method of cutting plywood using a table saw.

The process can be complicated especially when you are cutting large plywood sheets using a table saw. However, there are several ways you can manage to cut them more effectively.

Here are the steps you can follow to cut the plywood with ultimate effectiveness:

  • Choose the appropriate blade. For you to get a perfectly straight cut on plywood using a table saw, you need to buy a blade with special features and with plenty of teeth. For instance, you can get the eighty TPI saw blade for plywood. It is perfect because it has 80 teeth per inch.
  • Clean the table saw blade. You need to keep the table saw blade polished and clean. You should note that debris and rust can cause a lot of friction that will then inhibit the cut you make on the plywood.
  • Raise the table saw blade to enhance the cut. Raising the blade will alter the direction that the teeth enter the plywood.
  • Proceed to lay the plywood against the table saw fence.
  • You need to provide supports for the entire plywood sheet. This is because large plywood sheets can prove to be heavy.
  • The next thing you need to do is apply masking tape to the cut mark. You need to mark both sides of the plywood. It helps in keeping the fibers of the plywood in shape and prevents any kind of chipping around the edges. The moment you are done cutting, you need to start peeling off the tape slowly to prevent any kind of splintering.
  • You must make sure that you cut the plywood when its best face is facing an upward direction.
  • Then begin cutting the plywood using the table saw

How to Protect Your Table Saw Surface?

To protect the table saw surface, you need to do a wax job at least twice a year to eliminate all rust and moisture. An additional advantage of waxing is that it reduces friction and the boards to glide more effectively across the top.


Finding the right table saw isn’t easy. You need to look into different features and also consider your budget. This blog post has explained some of the factors you should look for in a hybrid table saw.

If you’re unsure about which one would be the best fit for your needs, we recommend checking out our top 3 hybrid table saw reviews.