Titebond and Gorilla are two popular brands of wood glue in the industry. You should also check out if you need to purchase wood glue to build your next project. These two brands offer excellent performances and quality, so deciding which brand to choose may be difficult to make.
In this blog post, we will compare these two brands and help you choose which one would be best for your next project.
There are many kinds of wood glue, and one is Gorilla Wood Glue. It is made by the same company that produces Titebond wood glue, which has been around for over 50 years.
What is Gorilla Wood Glue?
One of Gorilla’s main components is urea-formaldehyde resin, which gives it a much greater gluing capacity and strength than most other wood glues. Gorilla glue is considered a water-resistant all-purpose glue and works very well on most types of wood.
One downside is that you must be careful when using Gorilla in wet conditions, as it becomes less adhesive and will eventually fail if exposed to water for too long.
Unlike some glues, Gorilla does not work instantly. It takes about 24 hours for Gorilla Glue to dry completely, so keep that in mind when working with delicate or small pieces.
However, it dries clear, Gorilla can also be used to add joints without them being visible. Gorilla Wood Glue is excellent for any beginner or experienced DIYer looking for a quality product at an affordable price.
What is Titebond Glue?
As a product of Elmer’s Products, Inc., Titebond was introduced in 1960 and became one of their most popular brands. It is safe to use around children and pets as long as they don’t consume it. There are no toxic fumes to worry about when using or working with products made from Titebond.
According to many homeowners’ reviews, its large glue tubes prove more cost-effective than many other wood glue brands today. This product can be used indoors and outdoors depending on your project needs, but there should be ample ventilation while you work.
Don’t forget that once you open any tube of Titebond, you have only a few months before it will dry out completely.
Recently some hardware stores started selling Gorilla brand adhesive because it is often less expensive than other top-tier brands such as Gorilla Wood Glue or Titebond III. It has proven strong when used correctly on hardwood and softwood projects.
But you should never use it directly with unfinished wood or any other porous material that contains moisture from being freshly cut from a tree.
What happens if moisture appears on your surface during the glue-up? In the glue-up process, you will have to remove all clamps and re-clamp them after allowing the wood time to dry out for several hours.
Gorilla Wood Glue vs Titebond Glue Comparison Table
Whether to use Gorilla or not is a common question among woodworkers when they have to pick one of them as their favorite wood glue. The answer depends on what you’re doing and how much you are willing to spend.
Let’s take a closer look at these two brands and their features to get more information about whether you should use Gorilla or Titebond.
If the price is not an issue for you, then Titebond III Ultimate would be a better choice. It costs less than any other brand, but its performance could never compare with Gorilla’s professional products.
| Product’s Name | Package | Color | Feature |
|---|---|---|---|
| Gorilla Wood Glue | 18-ounces bottle | White | * Water-resistant wood glue * Booth indoor and outdoor usage |
| Gorilla Waterproof Ultimate Wood Glue | 8-ounces bottle | Natural | * Ideal for outdoor applications * Incredible strong glue strength |
| Titebond II Premium Wood Glue | 16-ounces cartridge | Honey cream | * Water-resistant wood glue * Excellent adhesive strength |
| Titebond III Ultimate Glue | 8-ounces tube | Tan | * Suitable for indoor and outdoor woodworking * Less expensive |
| Titebond 5063 Original Wood Glue | 8-ounces bottle | Yellow | * Heat-resistant glue * Fantastic sand ability |
Remember that Titebond II works best on softwoods, while Titebond III works great on hardwoods. Titebond I require more time for the set. Moreover, most reviews show that Gorilla glues work faster than other brands of wood glue (it dries darker). This means you can put your project together after application.
That said, there are still many options available for each brand. For example, Gorilla glue comes in both white and yellow varieties, while Titebond only provides white color.
So, there are things you need to consider before making up your mind. Like cost/performance ratio, application requirements and color preference, etc.
Why Choose Gorilla Wood Glue Over Titebond?
Gorilla Wood Glue is stronger than Titebond. Gorilla Wood Glue offers an extra strength that makes a huge difference in your project. Gorilla also has less sticky time so you can move on to your next step quickly and without delay. And, Gorilla dries faster, so you don’t have to wait hours or days for it to set up properly.
Most importantly (to some of us), you get twice as much Gorilla Wood Glue than with Titebond. Of course, there are pros and cons to everything.
Gorilla may dry faster, but their cure time is longer. It can develop dark spots if not fully cured before applying any stain. But overall, we find many reasons why using Gorilla would be better for you.
Check out our comparison chart above if you are still undecided about which brand should go into your toolbox. We suggest going with Gorilla because it will last longer and save you money down the road. There’s no reason why anyone shouldn’t use Gorilla. It will work just fine.
More people choose Gorilla over Titebond because they want a more permanent solution. The problem is that people who shop online have already made their decision. When they come to us looking for a solvent, it means they have not made up their minds yet.
Titebond vs Gorilla – Surface Application Differences
Gorilla wood glue is water-resistant and made for outdoor projects. It is UV-treated to make it last a long time, even when put under direct sunlight. Compared to Titebond, Gorilla holds on to wood fibers better than any other brand of wood glue.
When you use Gorilla Wood Glue, you do not need clamps because it does not creep along surfaces like most ordinary glues. But one disadvantage about Gorilla is that they cannot be painted over. Thus, if you are looking for something that can resist paint or stain, then we recommend using Titebond to your preference.
One thing I want to stress here is just because Titebond will let stains dry easier without leaving ugly patches. It’s not mean that it will work in every situation or leave a pleasant finish.
For ease of application and good results, Titebond beats Gorilla hands down. Suppose you have an expensive project where perfection is important. Then you go with Titebond otherwise, pick Gorilla glue if all you want is a reliable bonding process without spending much money.
Frequently Asked Questions
Which is Stronger Gorilla Glue or Titebond 3?
Have you ever wondered which one of these is stronger Gorilla Wood Glue or Titebond 3? Many woodworkers ask themselves if Gorilla glue is as strong as Titebond 3 or if it can hold wood together well enough to build with it.
There are many things to consider when comparing two different types of glues, but these two brands are about equal.
They’re both strong enough for any type of woodworking project. Whether its large scale furniture making or simple arts and crafts projects. We compared their features below so that you know exactly what each brand offers before choosing your go-to adhesive brand for your next project.
How Much Weight Can Gorilla Wood Glue Hold?
Using Gorilla wood glue to make a box can safely hold up to 150 pounds of weight.
How much weight can Titebond hold? Using Titebond wood glue to make a box can safely hold up to 250 pounds of weight.
Based on these two comparisons, we think that Gorilla wood glue is better than Titebond for box projects.
Why? Because it can hold much more weight than Titebond. And also, if you are going to build boxes or bookshelves and then load them with weights. Why would you choose an inferior product when you could use something much stronger like Gorilla Wood Glue?
Is Titebond a PVA Glue?
Just because a glue bottle says, PVA on it doesn’t mean it has to be used only with wood. For example, Elmer’s white glue is also a PVA adhesive, but you wouldn’t want to use it to adhere to any kind of wood surface. The strength and performance requirements are too different.
If you don’t know how much weight your project can bear, pick up something else; chances are good you won’t get what you want from either Gorilla or Titebond.
How Long Does Gorilla Glue Take to Dry?
The average drying time of Gorilla Wood Glue is around 15 minutes. This gives users ample time to complete their projects as soon as possible. In addition, it provides enough time to adjust and fix some mistakes you may make while working on your project.
How Long Does Titebond Take to Dry?
You should allow the wood to air dry for at least 24 hours after gluing it. For Titebond Polyurethane Glue, we recommend claiming it tightly or placing weights on top of each other. Curing time is approximately 45 minutes with 6 total hours before full dryness.
What is the Strongest Wood Glue?
Polyurethane glue is a versatile product used for many different materials. Gorilla Wood Glue, one of the most popular polyurethane-based glues on today’s market, has been proven repeatedly as strong enough to hold even larger pieces together.
Can I Use Gorilla Glue on Fabric?
No, Gorilla glue is not suitable for fabric. The reason is that Gorilla glue contains water, which will make your fabric dampen. The dampness will cause a bad smell and damage your fabric’s texture.
Moreover, to ensure whether you can use wood glue on fabrics, you can try to do a small test before doing it on a large scale.
Just apply a drop of glue onto your garment in an inconspicuous area. Wait for 24 hours, then look at it and see if there are any changes or dries up in your garments. If there are no such changes, then everything should be okay to use Gorilla Wood Glue as long as you carefully follow our safety instructions below.
Is Gorilla Glue Good for Styrofoam?
The first thing to remember about glue for Styrofoam is that you shouldn’t use wood glue on it. While Gorilla and Titebond are excellent wood glues, they won’t adhere well to Styrofoam. The best choice for a Styrofoam adhesive is superglue or epoxy, which have greater adhesion strength. Another option would be using our hot melt glue sticks.
If you need to join pieces of different materials like metal, plastic, or leather, then hot melt glue is also an excellent option for these projects. It instantly bonds two surfaces with incredible strength when applied in liquid form.
Hot-melt glues are a great solution when using hot melt isn’t workable. They provide great bonding between dissimilar materials, such as metal buttons on wool coats and rubber soles with boots.
Does Gorilla Glue Work Underwater?
Gorilla Glue is an amazing product for all sorts of projects, but it won’t be able to help you out if your project requires putting the glue underwater.
That said, once the glue has dried and cured – which can take up to 24 hours or more depending on how fast things are going – Gorilla Glues are 100% waterproof as well as non-toxic, so they’ll work great no matter what type of hobby/craftsman tool set one uses while working with them.
Conclusion
If you’re looking for wood glue to complete your next project, we recommend checking out Titebond and Gorilla. Both brands offer excellent performance and quality so it may be difficult to decide which one is the right choice for you.
Be sure to take into account all the necessary factors discussed in this article when making this decision such as cost, usage requirements, etc., before settling on any one option.
