Some of us know that some DeWalt miter saws can be locked into place for safety purposes. Many times, the blade will get stuck in the locked position making it difficult to unlock, but have no fear.
In this article, we will show you how you can easily fix this problem without calling a repair professional. If you follow these simple steps, then you should have your miter saw going again in no time.
Step 1: Unplug the Miter Saw
So let’s get started with the tutorial on how to unlock the DeWalt miter saw. First, unplug the machine from the power supply if that is an option. If not, then simply turn off the breaker or fuse that supplies it with electricity.
You don’t want to get shocked when you’re taking care of your saw. This might be a safety precaution in some models, but either way, it’s always best to be safe rather than sorry.
Once the machine is unplugged or the power supply is switched off, we can begin our tutorial on how to unlock the DeWalt miter saw.
Step 2: Find the Switch
First, look around until you find a switch of some kind for your machine. Some machines may have a button while others will require you to use a screwdriver in order to release the lock button when it jams.
Once you’ve found a switch or button, press it to release the lock mechanism on your saw. This is going to give you access to the blade so that you can pull it out of its track in order to fix any further problems with it.
Finally, your last step when learning how to unlock dewalt miter saw is to simply disengage the blade so that it’s no longer being used. If you have a power cord plugged in, then you are going to want to unplug it from the wall. Next, look for any release button or switch on your miter saw and quickly press it before lowering your saw into its resting position to prevent any further damage. The last and final thing that you will want to do is to pull the blade out of its track just in case it gets stuck or jammed again in the future.
That’s it! If you follow these simple steps when learning how to unlock dewalt miter saw, then you should be well on your way to getting your machine up and running again in no time at all.