If you have ever tried to remove a screw that was stripped or broken, you know how frustrating it can be. A screw extractor is a tool you need to get the job done right.
In this step-by-step guide, we will show you how to use a screw extractor like a pro.
Why Do I Need A Screw Extractor?
A screw extractor is a tool that can be used to remove screws that are broken, stripped, or otherwise difficult to remove.
It is important to select the right extractor for the job, as not all extractors are compatible with every type of screw. The extractor should also be compatible with the size of the drill bit you will be using.
Step 1: Choose the Right Screw Extractor
First, you need to choose the right screw extractor for your project. There are many different types of screw extractors available on the market today, but not all of them will work well with every type of screw or material.
Before purchasing a new tool, make sure it is suitable for your needs and compatible with the type of screw you intend to remove.
Step 2: Select a Drill Bit
Next, select a drill bit that is the same size as the head of the screw extractor. This will ensure a tight fit between both tools and help prevent damage to your work surface while drilling into it.
Step 3: Secure Work Surface
After selecting the right screw extractor and drill bit, it is time to secure your work surface. Make sure there is no movement on any side of the area where you will be working before proceeding with the removal process.
Step 4: Drill Into Screw Head
Next, place one hand over the top part (not the bottom) so as not to make contact with a drill bit and start drilling into the screw head. Apply firm pressure to ensure the drill bit is making good contact with the extractor.
Step 5: Turn Extractor Counterclockwise
Once you have drilled through the screw head, turn the extractor counterclockwise using your other hand. Do not apply too much force or you may damage both tools!
Step 6: Remove Screw and Extractor
Continue turning the extractor until it is fully removed from the screw. If there are still some pieces left behind, remove them with needle-nosed pliers or tweezers.
If all goes as planned, the screw will come right out with the extractor still attached. If it doesn’t budge, repeat steps until the screw is removed.
Now you know how to use a screw extractor like a pro!
Which Way Do You Turn A Screw Extractor?
When using a screw extractor, it is important to remember that the tool needs to be turned counterclockwise in order to remove the screw.
Do not apply too much force or you may damage both tools. If the extractor doesn’t seem to be working, repeat steps until the screw is removed.
Do Screw Extractors Really Work?
There is some debate over whether or not screw extractors actually work, but in general, they do a good job at removing screws that are stripped or broken. It is important to select the right extractor for the project at hand and to make sure both the extractor and drill bit are compatible with the type of screw you are trying to remove.
You should also secure your work surface before starting to drill into the screw head. Apply firm pressure to the drill bit while drilling, and then turn the extractor counterclockwise once you have drilled through the screw head.
If all goes as planned, the screw will come right out with the extractor still attached.
What Happens If a Screw Gets Stripped?
When a screw becomes stripped, it means that the metal around the screw has been damaged or eroded. This can be caused by over-tightening, using the wrong type of screwdriver, or by trying to remove a screw that is too tight.
If the screw becomes too damaged, it will be difficult, if not impossible, to remove it using traditional methods. In this case, a screw extractor may be your best bet.
The extractor is inserted into the hole that was drilled into the screw head and turned counterclockwise until the screw is removed. It is important to use caution when turning the extractor, as too much force can damage both tools.